Item # JXL1-(Specify Size), JXL Series External Connector, Specifiy Size between 0.501"

Request Information

Manual lever actuated internal grip and seal connection tool for straight tubes/bores.

Typical Lead time is 1-2 weeks, but varies based on demand.

Unit of Measure

Brands	N/A FasTest GTek Automation
Sealing Inside Diameter (ID)/Tube Inside Diameter (ID)	N/A 0.501 to 0.875 in
Pressure Rating	N/A 10 mTorr (micron) to 1000 psi (69 bar)
Connects To	N/A Swaged
Note for Pressure Rating	N/A Pressure rating based on metal test piece not exceeding 30 Rockwell C hardness, As a general guideline, surface must be 5 micro inches or greater, Surfaces less than 5 micro inches not recommended
Operating Temperature	N/A 0 to +200 ºF-17 to 93 ºC
Material of Construction	N/A Acetal (Polyoxymethylene (POM)) Aluminum Stainless Steel Urethane Collet Retainer
Termination Port Size (T)	N/A 1/4 in
Termination Port Type (T)	N/A British Standard Parallel Pipe (BSPP(G))
Tube Size Tolerance (±)	N/A 0.010 in0.25 mm

Seal Material¹	N/A Neoprene®
Note for Seal Material	N/A Additional seal material types available.

Lever Actuated

N/A Fast

N/A Fast Reliable Safe

N/A

Pressure assisted sealing and gripping with internal safety lock feature resists accidental disconnection under high pressure if handle is released
Instant connection for copper, steel, and aluminum tubes commonly used in refrigeration and other industrial applications
Stainless steel collets provide maximum grip with minimum distortion of the test piece
Quick and easy seal replacement to minimize down time, maintenance, and tool inventory
Self aligning connector requires no operator adjustment

N/A Additional sizes available for JXL Series connectors.

Body sold separately, select seal set for the base connector.